Depureco BL 45 JC DEX ATEX Vacuum with JetClean, 45 Litre

Name: Depureco BL 45 JC DEX ATEX Vacuum with JetClean, 45 Litre
Brand: Depureco
SKU: A1345

Model code · A1345

The 45 litre BL with a 34,000 cm² antistatic cartridge and JetClean filter cleaning, for long runs on fine combustible dust.

Request a quote/advice

Certification	ATEX, third-party certified — Zones 21 and 22
ATEX marking	II 1/2D Ex h IIIC T140 Da/Db II 1/3D Ex h IIIC T140 Da/Dc
Type	Dry type (EN 17348)
Power	1.1 kW (1.5 HP) brushless motor
Supply	110 V or 230 V, 50/60 Hz, single-phase
Maximum vacuum	230 mbar (23 kPa)
Maximum airflow	220 m³/h (approx. 129 CFM)
Inlet	50 mm with sliding damper
Bin	45 litres, AISI 304 stainless steel
Primary filter	M-class antistatic polyester, 34,000 cm²
Secondary filter	H14 fibreglass, 9,100 cm²
Filter cleaning	JetClean
Noise level	72 dB(A)
Footprint	540 × 620 mm
Height	1,300 mm
Weight	45 kg

About the BL 45 JC DEX

This is the highest specification single-phase ATEX machine in the range: the capacity of the BL 45 with the filter area and JetClean cleaning of the BL 20 JC. It suits production areas where fine dust is collected all day and the operator cannot keep stopping to service the filter.

Closing the inlet damper and lifting the JetClean flap sends a reverse pulse of air through the cartridge, clearing it into the 45 litre stainless steel bin. Filtration is two-stage, antistatic M-class followed by H14, inside a chamber certified to category 1D.

Key features

JetClean filter cleaning without stopping the motor
Antistatic M-class cartridge, 34,000 cm², plus H14 secondary filter
Sealed motor head with brushless, spark-free motor
Internal chamber third-party certified to category 1D
45 litre AISI 304 stainless steel drop-down bin
All components grounded

Depureco BL 45 JC DEX cutaway showing motor, filter, inlet and collection bin — BL 45 JC DEX — what is inside. Manufacturer’s illustration.

Certified to the European ATEX directive 2014/34/EU. Zone suitability must be matched to your site’s hazardous area classification — tell us the zone and the dust or gas group when you ask for a quote, and talk to your site safety team before specifying equipment for a classified area.

Request a quote/advice