Depureco M65/100 JetClean TAN Fine Dust Vacuum, 3.9 kW, Tangential Inlet

Depureco M65/100 JetClean TAN Fine Dust Vacuum, 3.9 kW, Tangential Inlet

Model code · A1550 / A1560 (A1551 with endless bag)

The three-motor M65/100 set up for fine dust: a 35,000 cm² cartridge filter, JetClean cleaning and a tangential inlet that spins material out of the airstream before it reaches the filter.

Request a quote/advice
Power3.9 kW (5.2 HP) — 3 by-pass motors
Supply230 V, 50/60 Hz, single-phase
DutyIntermittent — dust and liquids
Maximum vacuum250 mbar (25 kPa)
Maximum airflow570 m³/h (approx. 336 CFM)
Inlet70 mm tangential, with cyclone
Collection65 or 100 litre bin, or endless bag
Primary filterM-class conical cartridge, PTFE-coated polyester, 35,000 cm²
Filter cleaningJetClean, semi-automatic
Noise level72 dB(A)
Footprint660 × 800 mm
Height1,300 mm (65 L) / 1,515 mm (100 L)
Weight80 kg

About the M65/100 JetClean TAN

Grinding, sanding and floor preparation produce large volumes of very fine dust, and that is the work this version is built for. The tangential inlet sends incoming air around the wall of the chamber, so the heavier fraction drops straight into the bin and the filter only has to deal with the fines.

What does reach the cartridge is cleared with JetClean: close the inlet, open the flap, and a reverse pulse of air cleans the filter while the motors keep running. Choose a 65 or 100 litre bin, or the endless bag system for dust-free disposal.

Key features

Depureco M65/100 JetClean TAN cutaway showing motor, filter, inlet and collection bin
M65/100 JetClean TAN — what is inside. Manufacturer’s illustration.

Supplied to order. Supply voltage, plug and lead are confirmed for your site at quotation, along with filter class and collection options.

Request a quote/advice