Depureco Puma Heavy Duty Industrial Vacuum, 7.5 to 18.5 kW, 175 Litre

Depureco Puma Heavy Duty Industrial Vacuum, 7.5 to 18.5 kW, 175 Litre

Model code · A500 / A540 / A560 / A580 / A571 / A557 / A574

A heavy duty three-phase vacuum for bulk material, long pipe runs and multiple operators. 7.5 to 18.5 kW, a 45,000 cm² filter and a 175 litre bin.

Request a quote/advice
Power7.5 kW to 18.5 kW (10 to 25 HP)
Suction unitSide channel blower, IP55, insulation class F
Supply400 V, 50/60 Hz, three-phase
DutyContinuous — dust
Inlet100 mm tangential, with cyclone
Bin capacity175 litres
Primary filterM-class polyester, 45,000 cm²
Filter cleaningManual shaker, or electric shaker (SE)
Noise level74 dB(A)
Footprint850 × 1,550 mm
Height1,980 mm

About the Puma 10 to Puma 25

The Puma is for recovery work measured in tonnes rather than bins: spilt product under conveyors, silo and hopper clean-outs, foundry sand, cement and aggregate. It also works as the power unit for a small fixed pipework system with several suction points.

Material enters through a tangential inlet, so the bulk of it spins out and falls into the 175 litre bin before the air reaches the 45,000 cm² filter. The blower is housed in a cabinet on the same wheeled chassis. Larger Puma 30 and 35 models, up to 25 kW, are available on request.

Key features

Depureco Puma 10 to Puma 25 cutaway showing motor, filter, inlet and collection bin
Puma 10 to Puma 25 — what is inside. Manufacturer’s illustration.

Models in this series

ModelCodePowerVacuum (continuous)Max airflowWeight
Puma 10A5007.5 kW260 mbar730 m³/h295 kg
Puma 15 PA54011 kW300 mbar950 m³/h330 kg
Puma 15 SA56011 kW440 mbar550 m³/h310 kg
Puma 18 PA58012.5 kW290 mbar1,120 m³/h355 kg
Puma 18 SA57112.5 kW530 mbar720 m³/h335 kg
Puma 20A55715 kW350 mbar950 m³/h350 kg
Puma 25A57418.5 kW320 mbar1,380 m³/h370 kg

Supplied to order. Supply voltage, plug and lead are confirmed for your site at quotation, along with filter class and collection options.

Request a quote/advice